KELIBRON Digital caliper: depth of blind bore Ø30
Digital caliper: depth of blind bore Ø30: a 28-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.
What happens in the video
- 0:00 Digital caliper: depth of blind bore Ø30
- 0:04 Close the jaws fully and press ORIGIN: the display reads 0.00.
- 0:09 Rest the beam end flat on the face of blind bore Ø30, over the bore.
- 0:13 Push the depth rod down gently until it touches the bottom.
- 0:18 Read: 14.93 mm, outside 15.00–15.05 mm. The part is rejected.
In the course
- Tolerances, limit gauges and pass or fail · Acceptance limits and safety margins — Decide pass or fail when a reading is close to a limit.
