KELIBRON Guides
CoursesOpen the lab

Dial caliper: outside diameter of Brass bushing Ø40

0:28Download video (15.0 MB)

Dial caliper: outside diameter of Brass bushing Ø40: a 28-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.

Follow step by step →

What happens in the video

  1. 0:00 Dial caliper: outside diameter of Brass bushing Ø40
  2. 0:04 Close the jaws and turn the bezel until the needle sits on 0.
  3. 0:09 Open the jaws and set Brass bushing Ø40 deep between them, square to its axis.
  4. 0:13 Close the moving jaw gently until both faces touch.
  5. 0:18 Read while the caliper is still on the part: 39.96 mm, within 39.92–40.00 mm.