KELIBRON Wrong use: Debris (turned shaft Ø25)
Wrong use: Debris (turned shaft Ø25): a 38-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.
What happens in the video
- 0:00 Wrong use: Debris (turned shaft Ø25)
- 0:04 Close the jaws fully and press ORIGIN: the display reads 0.00.
- 0:09 Open the jaws and set turned shaft Ø25 deep between them, square to its axis.
- 0:13 Close the moving jaw gently until both faces touch.
- 0:18 Read while the caliper is still on the part: 24.98 mm, within 24.95–25.00 mm.
- 0:23 Wrong: a chip sits on the jaw face. The part rests on it, so the reading is too large.
- 0:29 With the mistake the result is 25.06 mm: never accept a reading taken this way.