KELIBRON Measuring conditions
Measuring conditions: a 46-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.
What happens in the video
- 0:00 Measuring conditions
- 0:05 Drawing sizes refer to 20 °C. This lab does not simulate temperature.
- 0:11 A chip on a jaw face: the outside reading comes out large. Not evaluated.
- 0:18 Squeezed too hard: the jaws spring, so the reading is small. Not evaluated.
- 0:25 Faces wiped, jaws closed lightly and steadily: now the reading is evaluated.
- 0:32 Before you read: temperature, clean faces, zero, alignment, measuring force.
In the course
- Measurement basics · Measuring conditions — Prepare the part, the instrument and the place before measuring.
