Name: Digital caliper: outside diameter of Stepped shaft Ø20/Ø32
Uploaded: 2026-11-03T08:00:00+08:00
Duration: 28 s
Description: Digital caliper: outside diameter of Stepped shaft Ø20/Ø32: a 28-second captioned video from the KELIBRON 3D measuring lab, with every step written out and a link to try it in the lab.

Digital caliper: outside diameter of Stepped shaft Ø20/Ø32

Digital caliper: outside diameter of Stepped shaft Ø20/Ø32: a 28-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.

What happens in the video

0:00 Digital caliper: outside diameter of Stepped shaft Ø20/Ø32
0:04 Close the jaws fully and press ORIGIN: the display reads 0.00.
0:09 Open the jaws and set Stepped shaft Ø20/Ø32 deep between them, square to its axis.
0:13 Close the moving jaw gently until both faces touch.
0:18 Read while the caliper is still on the part: 32.02 mm, within 31.95–32.05 mm.

In the course

Gauge calibration and management · Choosing a caliper — Compare calipers by their specifications and pick one for the job.

Read the guide

Instrument careHow to choose a caliperCompare calipers by objective specifications: measuring range and jaw length, readout type, maximum permissible error (not only resolution), protection rating for digital models, materials and construction, data output, and the certificate supplied.