Name: Digital caliper: outside diameter of keyway shaft Ø35
Uploaded: 2026-11-03T08:00:00+08:00
Duration: 28 s
Description: Digital caliper: outside diameter of keyway shaft Ø35: a 28-second captioned video from the KELIBRON 3D measuring lab, with every step written out and a link to try it in the lab.

Digital caliper: outside diameter of keyway shaft Ø35: a 28-second reenactment recorded in the KELIBRON 3D lab, with English captions. The steps below are the captions in order, and you can do the same measurement yourself in the lab.

What happens in the video

0:00 Digital caliper: outside diameter of keyway shaft Ø35
0:04 Close the jaws fully and press ORIGIN: the display reads 0.00.
0:09 Open the jaws and set keyway shaft Ø35 deep between them, square to its axis.
0:13 Close the moving jaw gently until both faces touch.
0:18 Read while the caliper is still on the part: 34.99 mm, within 34.95–35.00 mm.

In the course

Part inspection in practice · Finding the characteristics on a drawing — List every characteristic on a drawing that has to be checked.

Read the guide

Measuring methodsFinding the inspection characteristics on a drawingAn inspection characteristic is a requirement on the drawing that the part must meet and that someone has to check: a size with its tolerance, a size that takes the general tolerance, a geometric tolerance, a surface texture requirement, or a note that sets a requirement, plus any requirement added by the purchase order.